Dual Swivel Inflator - Diluent (for BMCL)

RBV07/DUAL/35S - Dual Swivel Inflator - Diluent (for BMCL) with AP35S Counterlung Inlet

Upgrade Kit includes:

• RBV07/DUAL Swivel Inflator unit
• AP35S low profile BMCL inlet elbow

The Dual Swivel Manual Inflator for Inspiration rebreathers with back mounted counterlungs (BMCL) is one option among the new range of swivel inflators (see below for other options). The double inflator has two inlet blocks allowing two truly independent gas supplies to be connected to the inflator block at the same time. 

Both top and bottom inlet blocks pivot through 360° allowing hose routing from all directions - over-the-shoulder, under-the-arm or from the front or below to side-mount, deco-station or dive buddy cylinders.

The Dual Swivel Manual Inflator is also available for the oxygen side - see RBV07A/DUAL/35S.

Upgrade for existing owners:

The Dual Swivel Manual Inflator can be retro-fitted to all existing Inspirations with BMCL. The diver can use their existing hoses if they swap around the one feeding into the counterlung so that the knurled female connection end attaches to the new inflator block outlet and the 3/8^th UNF male connector attaches to the new AP35S low profile inlet elbow (included) which replaces the current counterlung inlet elbow.

Other Swivel Inflator options:

In developing the new single inflators AP have designed a complete range of swivel inflators with different functions. These options can also be retro-fitted or ordered with a new unit in place of, or in addition to, the single inflators. The options are:

Single Swivel Inflators - A single inflator block with a rotating inlet block which can swivel through 360 degrees to allow different hose routing possibilities for onboard or offboard gas. Available for both oxygen (RBV07A/35S) and diluent (RBV07/35S).  

Dual Swivel Inflator - Oxygen - A dual inflator block with two rotating inlet ports to allow two independent gas sources - onboard or offboard - to be plugged into a single inflator block at the same time. See (RBV07A/DUAL/35S). 

Single Diluent Inflator with GC3 (Flowstop) Shutoff Valve - includes a hose from the Flowstop to the ADV inlet. See RBV07/SO/35S. It allows the ADV to be easily isolated after the initial descent if the diver prefers to control the diluent manually during the middle section of the dive.

Single Oxygen Inflator with GC3 (Flowstop) Shutoff Valve - includes a hose from the Flowstop to the Solenoid inlet. See RBV07A/SO/35S. It allows the Solenoid to be easily isolated. 

Dual Swivel Inflators with GC3 (Flowstop) Shutoff Valve - (for either oxygen or diluent) - includes both the GC3 and the relevant hose to either the solenoid or ADV. In this model the top swivel inlet block features both an inlet and an outlet. A GC3 shutoff valve sits in-line after this outlet which allows the diver to quickly and easily isolate the solenoid (oxygen side) or ADV (diluent side). 

This combines all the advantages offered by both the Dual Inflator and the Inflator with Shutoff Valve. See RBV07/DUAL/SO/35S (for diluent version) and the RBV07A/DUAL/SO/35S (for oxygen version).